• With "Fillet Pro" you can join stainless steel to
  chrome-moly and vice versa.

• For fillet brazing at below 1200F

• Ideal for use with Martensitic SS ( 953)and XCR,
  Cycle Design SS Dropouts and G.P. Wilson 17/4.
  Paragon and other SS tips and parts.

• Beyond any brass in finish strength at silver temps

• Excellent for tips and fork crowns or loose fits.

• Capable of joining without support with 100% joint integrity

• "FILLET PRO" is being used Worldwide for SS and Steel fillet frames by Top Builders.

• Joining with Fillet Pro results in distortion free construction

Anything that can be done with LFB can be done 
    with "Fillet Pro" and more....

Use with SSL Flux

Quantity

 "System 48" rod and flux together has the best capillary action and deepest filler penetration of all previous Silver Brazing formulas.

 "System 48" Also will build connection fillets for seat stays, brake bridges, canti bosses, and is the only filler needed to build complete frame sets using lugs.

 "System 48" Flow temp is same as older 56% silver fillers and flux washes off with water.

• Gap filling is zero to over ten thousands for sure secure joints.

• Security equal to higher temp braze joints.

This combination of alloy and flux was developed by "Beta" construction testing over a period of two years, more than a hundred formulas were employed until any other possibility was ruled out!

The "Group" agreed this is as good as it gets!

Use with
System 48 Flux

Quantity

This Premium high purity 56% Silver Braze is made in the USA.

Use with SSL Flux
or
System 48 Flux

Our Touch Up Alloy

For Building up LFB and Fillet Pro Fillets, lug modification.  A structual repair for thin spots in fillets, uneven spots and dings in tubes.

Use with SSL Flux
or
System 48 Flux