Our products are designed for use by Professional Framebuilders for Professional Framebuilders.
Our customers rave about our products. We provide our products to put creativity and joy back into the process.

Here are a few of our User Comments!

  Freddy, I've used at least 7 different brands-types of brazing rods over the years and yours is the Champion Du Monde!! You have hit a true grand slam. Big thanks for making the effort. All the best, Jeff Lyon (Web Link)

  Its absolutely brilliant, the best flux and silver I’ve ever used, top work! You can quote me on this too. Thanks!
 Mark Reilly (Web Link)

  We find Fillet Pro to the most useful alloy around the shop. We use it for everything from braze-ons to dropouts. This alloy is truly universal. Our builders prefer to use it over other popular brands. Clark Davidson (Web Link)

  I purchased fillet pro from Freddy with the intention of installing only the Stainless Steel dropouts then when I found out how extremely user friendly it was, I proceeded to use it to complete the entire Stainless Steel lugged bicycle. Every joint on the bicycle is done with fillet pro including the braze-ons. Scott McGill (Web Link)

  I decided to build the bicycle that I took to the NAHBS 2010 show entirely using the fillet pro system. I was very please to win an award at the NAHBS show with this bicycle. Renold Yip (Web Link)

  I've used fillet pro since Freddy first offered it. I find it to be the most efficient way to join stainless steel parts. Very clean and user friendly to work with. I highly recommend it. Spencer Wright (Web Link)

  I am not only a Fillet Pro System user but I have put 10's of thousand of miles on my personal bicycle built with fillet pro. I've shown my personal bicycle twice at National shows and it continues to be my daily ride. Vincent Dominguez (Web Link)

  I built my personal bicycle using Freddy's fillet pro during Beta Testing many years ago. It continues to be ridden on a daily basis. I have recently decided to build more bicycles using the Fillet Pro System. Richard Guggemos (Web Link)

  I brought my fillet pro build to the NAHBS 2010 show naked and hung it on the rack for everyone to walk by. I was the single most photographed and talked about bicycle at the show. I am now making more of them for customer orders. Joel at clockworkbikes.com

(Web Link)

  I use fillet pro because I can put intricate handmade parts together with it without any fear of distortion and is virtually indestructible.

Chris Bishop (Web Link)

  After using Fillet Pro I would not consider going back to using traditional alloys and Freddy's SS flux is pure dynamite.
Tommy Nash (Web Link)

  I first began using Freddy's flux and fillet pro years ago. I won several show awards with cycles built with it including my tandem and the Uber Bike. David Bohm (Web Link)

  The last six frames have all used your Fillet Pro.  All of the team frames and customer frames.  One is in Northern Spain right now.  Another in Vancouver.  One in Georgia. etc.  Two frames in my booth at NAHBS used Fillet Pro.

What I love most about it is how easy it is to form a really nice clean and tight tinning pass with a healthy internal fillet.  Then I can go back through and do my build pass.  I use a bigger, fatter flame for the tinning pass and pull it through to the inside of the tube.  Then I dial the flame back quite a bit and lay in the build material.  I keep the flame pretty damn small and I can lay that shit anywhere I want and it lays nice and flat.  The most notable spot is the BB/DT/ST crotch where I can fill in that area nice and easy.  Dynamite couldn't blow those fucking tubes apart and that helps me sleep at night.

Clean up is a breeze.  Dowel rod and 80 grit and 150 grit paper and it is done.  Rat tail files stay hanging.  No need.
Shamrock Cycles ( Web Link)
 

  Building my 953 with Fillet Pro and Freddy's 56 was a pure dream. Cory Rosene (Web Link)

  Hey Freddy, welcome aboard atmo. I am finally back to work and the 56 you sent me is a dream. I'll be down for some more. . .

Richard Sachs (Web Link)

Fillet Pro was designed and formulated to do everything that was possible with low fuming bronze at 400 to 500 degree lower temperature. Fillet Pro System can provide distortion free construction opening every possibility of construction design.